How To Winterize Swamp Cooler

Do you enjoy a nice cool breeze when the summer heat hits hard? A swamp cooler is an excellent appliance for cooling your home without relying on power-hungry air conditioners. However, there are specific steps that need to be taken for swamp cooler winterization properly. In this article, we’ll go over how to do that and what you can do to ensure your swamp cooler is in tip-top shape for next summer.

Winterize A Swamp Cooler

You’ve spent all summer enjoying the cool breeze that comes from your swamp cooler, and now it’s time to turn it off and get it prepared for the winter. Follow these steps:

This is to learn how to drain swamp cooler? Turn off the water supply to your swamp cooler. This will prevent leakages and cracks in the system during harsh winter conditions, which could lead to more damage to your cooler. You’ll also want to drain any moisture collected inside the unit itself–just be sure you don’t drain it on anything except dirt or grass. You don’t want any moisture to potentially seep into your foundation or basement, as that could cause severe structural damage.

If you have a pad under the cooler, remove it and store it for safekeeping until next summer. If there’s no pad–or if you can’t safely remove it from the area due to landscaping issues–then cover the bottom of the unit with a tarp first, then a thick layer of mulch on top of that. You can also buy a swamp cooler winter cover for this. Be sure to leave a few holes in the mulch so to swamp cooler drain out quickly. Finally, place some straw or leaves over those holes and around the exterior of the swamp cooler itself to minimize dust accumulation over the winter months.

So after learning how to drain a swamp cooler? Now, cover it with one of the swamp cooler covers and secure it. If you can’t fit the entire unit under one large tarp, don’t worry–use multiple tarps instead to fit your needs. This step will help shield your team from harsh winter weather such as snow and wind, so they don’t damage it in any way.

Finally, clean up all leaves and debris around your outdoor water spigot, then drain all of the water out of that line before freezing temperatures set in. This is one of the most overlooked steps for winterizing swamp coolers for a few reasons. Firstly, many people aren’t sure how to safely drain their outside spigot without letting water seep into their foundation, but it’s a straightforward process. And secondly, people assume that the water will drain itself out once the outside faucet has been left on during a freeze–but this isn’t always the case. So be sure to clean swamp cooler and drain your spigot before you secure your swamp cooler for winter to ensure it’s in good working order when spring comes around again!

You can read more about Best Surface Cleaner and How To Fix Chipped Paint On Wall

CONCLUSION

Winterizing a swamp cooler isn’t too tricky or complicated of a process, which is why many people prefer them over air conditioners for use during warmer months. But by taking the proper steps–in addition to regular cleaning and maintenance–you can keep your swamp cooler lasting longer while still enjoying cool summer breezes. Thank you for reading.